Less than truckload (LTL) shipping moves freight that fills part of a trailer. Your pallets share the truck with freight from other companies, and you pay for the space you use. Full truckload (FTL) books the whole trailer for one shipment.
Our transportation services cover both modes, and we run warehouses in Toronto, Oakville and British Columbia. This guide explains what less than truckload means, how carriers build the price, and the checks worth making before you book.
What does less than truckload shipping mean?
Less than truckload shipping covers any freight move that does not fill a trailer on its own. The carrier groups your pallets with other freight that is heading the same way. Each shipper pays for the portion of the trailer their goods occupy. That sharing is what keeps the cost of a small load below the cost of a whole truck.
The trade-off is handling. Your freight passes through terminals where it is unloaded, sorted and reloaded. It travels with more stops than a direct truckload run, so transit is usually longer. Our guide on LTL vs FTL shipping compares the two modes on cost, speed and damage risk.
How does an LTL shipment move from pickup to delivery?
An LTL shipment travels in stages. A local truck collects it and brings it to a terminal. Freight heading the same way is sorted onto a line haul truck, which carries the combined load to a terminal near the destination. A second local truck makes the final delivery.
Every stage adds a handoff, and every handoff is a chance of delay or damage. Sturdy pallets, tight wrap and clear labelling matter more on LTL than on a truckload move. Photograph the load before it leaves, so you have a record if pieces go missing.
A cross-dock can shorten that chain. Cross-docking moves freight straight from an inbound truck to an outbound truck with little or no storage in between. Grouping several small shipments into one outbound load is called consolidation. At our Toronto facility we unload shipments, load them directly onto outbound vehicles, verify counts and rework pallets when a load needs it.
How are less than truckload rates calculated?
Carriers price an LTL move on weight, on the space the freight takes up, on the lane, and on any extra services at either end. The lane is the route between the pickup point and the delivery point. Those extra services are called accessorials. A tailgate delivery, where the freight is lowered to ground level because the site has no dock, is a common one. Fuel is usually charged separately through a fuel surcharge. In Canada, this surcharge is often updated weekly based on the fuel index published by the Freight Carriers Association of Canada (FCA).
Two shipments of the same weight can be priced very differently. A light, bulky load fills trailer space the carrier cannot sell to anyone else, so it costs more than a dense load. Weigh and measure every pallet before you ask for a quote, and send the figures you measured.
One option is to ask the carrier how your freight is classified on the quote and what would trigger a reclassification later. If you want the full list of details to have ready, we set it out in our guide on what carriers need to price your shipment.
| What carriers price | Why it moves the rate | What you control |
|---|---|---|
| Weight | Heavier freight takes more of the truck’s available payload. | Weigh each pallet, counting the pallet itself. |
| Space used | A light, bulky pallet blocks space the carrier cannot resell. | Measure height, width and depth as the load sits. |
| Lane | A longer distance between the two points means more time and fuel on the road. | Group orders that are heading the same way. |
| Extra services | Tailgate work, booked appointments and sites with no dock add charges. | Describe both sites in full when you book. |
| Regulated goods | Compliant handling, documents and markings add work at both ends. | Declare them before the shipment is booked. |
Five checks before you book a less than truckload shipment
A few minutes of preparation removes most of the surprises on an LTL invoice. Work through these five checks before you book.
- Confirm the weight and the outside dimensions of every pallet, counting the pallet’s own weight and height.
- Check whether the pickup site and the delivery site each have a loading dock.
- Ask for the carrier’s transit time on your lane, and build a buffer into the date you promise.
- Tell the carrier about anything regulated in the load before it is booked.
- Compare the LTL quote against a consolidated move through a cross-dock on the same lane.
What changes when your freight is dangerous goods?
A small dangerous goods shipment is still a regulated shipment. Transport Canada states that the Transportation of Dangerous Goods (TDG) rules apply “to all modes of transport and to any quantity of dangerous goods”. The exact requirements vary with the goods and the container, and the regulations set out special cases that exclude certain situations or limit what applies.
The basic competency list from Transport Canada names five components. Anyone who offers dangerous goods for transport must hold a training certificate or work under the direct supervision of a certificate holder. For road transport that certificate is valid for three years.
The shipping document has to carry the United Nations (UN) number, the shipping name, the class and a 24-hour number. Compliance marks on the means of containment show that it is built and maintained to a safety standard. Dangerous goods marks identify the goods and the nature of the danger. Whoever has charge of the goods at the time of a release must take reasonable emergency measures and report a reportable incident.
We handle dangerous goods as part of our transportation services. We cover those shipper duties in more detail in our hazardous materials logistics guide.
How a third-party logistics partner changes LTL shipping
A third-party logistics (3PL) provider sits between you and the carriers. We book less than truckload and full truckload moves through a mix of our own assets and a network of partner carriers. We track shipments end to end and send automated reports on delivery status.
We consolidate and deconsolidate freight at our Toronto cross-dock. Deconsolidation is the reverse of consolidation, and it breaks one inbound load into separate outbound shipments.

We also exchange order and inventory data with your systems through electronic data interchange (EDI). EDI is a standard way for two businesses to send order and inventory records between their systems.
Where your stock sits matters too. Our Toronto, Oakville and British Columbia sites let you hold inventory close to your customers. Shipping from the nearest site shortens the distance the freight has to travel.
Frequently asked questions
What does less than truckload mean?
Less than truckload means your freight takes up part of a trailer, and other shippers’ goods fill the rest. You pay for the portion you use. The carrier groups your pallets with other loads heading in the same direction.
How are LTL rates calculated?
Carriers build an LTL rate from weight, the space the freight occupies, the lane and any extra services. Accessorial charges for work such as a tailgate delivery are added on top. Accurate weights and dimensions on the booking help keep the final invoice close to the quote.
Is LTL always cheaper than a full truckload?
LTL usually costs less when your freight fills only part of a trailer, because you pay for the space you use. As the load grows, the gap narrows. At some point a full truckload becomes the better value, so ask for both quotes on the same lane.
How long does an LTL shipment take?
Transit depends on the lane and on how many terminals the freight passes through. An LTL move usually takes longer than a direct truckload run on the same lane. Ask the carrier for a published transit time before you promise a delivery date.
Can dangerous goods travel on an LTL trailer?
Yes, when the shipment meets the TDG requirements. Those rules cover any quantity, and the exact requirements depend on the goods and the container. Tell us what is in the load when you ask for a quote, and we will confirm how it can move.
We run three warehouses, so you can ship from the one closest to your customers. Our Toronto site is at 41 Rexdale Blvd Unit 51, Etobicoke, ON M9W 1P1, and you can reach it at 877-447-4641. Our Oakville site is at 2130 South Service Rd W, Oakville, ON L6L 5N1, and you can reach it at 877-603-1276. Our British Columbia site is at 18822 24 Ave #103, Surrey, BC V3Z 0Y8, and you can reach it at 877-281-2632.
Send us the weight, the dimensions and the lane for your next shipment, and we will quote it. You can also book a free consultation, and we will go through your freight and the services that suit it.
